Polaris RZR PRO R Service Manual page 151

28. Install outer clutch cover. Install five fasteners
engage 1/4 turn latches to secure the cover. Torque
fasteners to specification.
TORQUE
Outer PVT Cover Fasteners:
60 in-lbs (7 Nm)
29. Install clutch intake hose. Tighten hose clamp
Torque hose clamp to specification.
TORQUE
PVT Intake Hose Clamp:
35 in-lbs (3 Nm)
30. Connect fuel line onto the fuel rail.
31. Connect coolant inlet and outlet hoses to the engine.
32. Fill coolant. Refer to coolant fill/bleed procedure
outlined in this chapter.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
e
and 33. Install cargo box and four fasteners
fasteners to specification.
34. Install upper and lower rear close-off panels.
w
.
35. Connect the battery. Torque cables to specification.
Battery Cable Fasteners:
36. Install seats. On 4-seat models, install the rear seats.
37. Fill and bleed the cooling system. Refer to Cooling
System Bleeding.
ENGINE / COOLING SYSTEM
q
. Torque
TORQUE
Cargo Box Fasteners:
7 ft-lbs (10 Nm)
TORQUE
60 in-lbs (9 Nm)
3
3.37