Transmission Assembly - Polaris RZR PRO R Service Manual

TRANSMISSION

TRANSMISSION ASSEMBLY

1. Thoroughly clean the mating surfaces of the
transmission case halves so they are free of 3 Bond
sealant. Failure to properly clean the surfaces may
lead to transmission case leaks.
2. Install output shaft gear
3. Install front output shaft
4. Install three idler gears
7.20
o
.
i
into gear housing.
u
as an assembly.
5. Install transmission input shaft
6. Install the shift shaft and forks as an assembly.
7. Lift up on the shift shaft rail and move the rail
assembly rearward to allow the shift fork pins to be
installed onto the shift drum
into the transmission housing.
8. Install the two sector gears.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
y
.
t
. Install the shift drum
© Copyright Polaris Industries Inc.