Polaris RZR PRO R Service Manual page 362

STEERING / SUSPENSION
t
10. Drill out clips that secure the brake line retainers to
the trailing arm using a 3/16" drill bit.
11. Remove the lower stabilizer bar linkage fastener
12. Support trailing arm with suitable jack stand or
support.
13. Remove the lower shock bolt
14. Remove two fasteners
9.24
u
.
i
from toe link access panel.
15. Remove the front trailing arm fastener
a
fastener .
16. Remove rear toe link fastener.
y
.
17. Remove trailing arm from vehicle. Visually inspect
trailing arm, bushings, and spherical bearing for wear.
18. Replace trailing arm if physically damaged.
INSTALLATION
1. Reverse removal procedure to reinstall rear trailing
arm.
Use new fastener nuts upon installation of the rear
trailing arm and bearing carrier.
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
o
and toe link
NOTICE
© Copyright Polaris Industries Inc.