Table of Contents
Advertisement
3-6. Mail Send Log Screen
When you use the menu to select [4. Maintenance/Test Run : 4. Sent mail log] while logged in as an
administrator, a screen such as shown below appears.
No.
The entry numbers for the sent mail log. With a maximum of 20 (No. 1 to 20) possible entries, the newest entries
appear at the top of the list. When the number of entries exceeds 20, entries are deleted starting with the oldest.
As up to three mail recipients can be specified, up to three log entries can be recorded for one alarm occurrence.
Rslt
"OK" appears when an alarm mail is sent properly, and "NG" appears when sending fails.
Send T.
The date and time the alarm mail was sent (or sending was attempted).
To
The recipient address the alarm mail was sent to. If the address is too long, only part of the address may
appear.
Unit name
The name of the indoor unit for which the alarm occurred.
Alarm code
The code for the alarm that occurred.
Stat
"Occurrence" appears when a notification of an alarm occurrence is sent, and "Restoration" appears
when a notification of an alarm restoration is sent.
Address
The address of the indoor unit for which the alarm occurred.
The address follows the format, "adaptor number - link number - system (outdoor) number - indoor number".
When a test mail is sent, "TEST_MAIL" appears.
SCREEN DISPLAY AND OPERATION
9
⑧
Advertisement
Table of Contents
