Printer Installation; Installing Line Printer Hp 990Cxi Or Hp 995C; Install The Hp Printer Software/Driver - GE Voluson 730 Service Manual

GE M S - K
EDICAL YSTEMS
D 105844, R
IRECTION EVISION
Section 3-5

Printer Installation

3-5-1

Installing Line Printer HP 990cxi or HP 995c

For connection schemes of Peripherals refer to Chapter 20 in the Basic User Manual of Voluson® 730.
NOTE: "Mouse functions" can be performed by using the trackball for moving the cursor.
"Normal select" (Click) by pressing the left or right trackball keys and for "opening a context
menu" press the upper trackball key.
1.) Turn ON the system, and wait till the system has booted.
2.) Prepare the color printer as illustrated at HP quick start poster "Windows quick start":
• Attach Automatic Two–Side Printing Module and load white paper
• Plug in power cord (Do NOT turn ON the printer!!!)
• Turn on the printer and install print cartridges, after closing the top cover a calibration page is
printed automatically.
3-5-1-1

Install the HP printer software/driver

Perform the following steps if this printer was never installed on the Voluson® 730!
3.) Connect the USB cable to the printer and the system. The windows 'Searching for Drivers ...',
'Found new Hardware ...' and finally the following windows appear.
3-12
U
RETZTECHNIK LTRASOUND
1
Figure 3-12 Found New Hardware Wizard
Section 3-5 - Printer Installation
V ® 730 S
OLUSON
select "Search for a suitable driver for my
device (recommended)"
Click on "Specify a location"
M
ERVICE ANUAL