GE Voluson 730 Service Manual page 61

GE M S - K
EDICAL YSTEMS
D 105844, R
IRECTION EVISION
3-5-2-1 Install the UP-D21MD printer software/driver (cont'd)
6.) Use the BROWSE button to search the following path C:\Utilities\PrinterDriver\SonyUP-D21MD
see:
7.) Confirm the correct path and click NEXT to install the driver. All necessary files are copied.
8.) The Message: Digital Signature Not Found appears. Click YES.
9.) Confirm the installation by clicking FINISH to close the Hardware Wizard.
10.)Close all open windows, close the "System Setup" with SAVE & EXIT and restart the system
(turn off and on the system).
After boot up of the system, verify the correct settings in the printer "Properties", see:
NOTICE
"Adjustment of Printer Settings" on page
Ver
U
RETZTECHNIK LTRASOUND
1
Figure 3-13and then click OK.
Figure 3-16 Search for Network path
Figure 3-17 Confirm correct path and finish the Installation
Chapter 3 Installation
3-23.
V ® 730 S
OLUSON ERVICE
Section 3-5-5
M
ANUAL
3-15