GE Voluson 730 Service Manual page 110

GE M S - K
EDICAL YSTEMS
D 105844, R
IRECTION EVISION
4-4-12-1 Formatting Media (cont'd)
By selecting CD-RW the unit displays the "Erase CD-RW" window as shown in
1.) Select the "Erase Mode" and click the OK button to start the format process.
It is highly recommended to use the complete erase mode, to avoid problems with the CD-RW!
NOTICE
2.) During erasing the Ultrasound system displays following message.
3.) Touch the EXIT key on the Touch Panel to return to the Scan Mode.
NOTE: It is possible to adjust the Write Speed of the CD-Writer.
At older software versions, also the Erase Mode can be preset in the "Settings" window.
1.) Click the SETTINGS icon on the left side of the Sonoview screen.
2.) Select
3.) Choose the "Write Speed" (and the "Erase Mode" at systems with older software versions)
from the corresponding pop-up menu.
4-26
U
RETZTECHNIK LTRASOUND
1
Figure 4-18 Erase CD-RW Window
Figure 4-19 Erasing disk
from the tool bar.
CD RECORDER
Settings-
icon
Figure 4-20 Settings of the CD-Recorder
Section 4-4 - Functional Checks
V ® 730 S
OLUSON ERVICE
Figure 4-18.
M
ANUAL