GE Voluson 730 Service Manual page 199

GE M S - K
EDICAL YSTEMS
D 105844, R
IRECTION EVISION
Section 8-3
EUM (Electronic User Manual) Upgrade Procedure
The Loading Procedure of the EUM (Electronic User Manual) differs at various software versions:
NOTICE
for Software Version up to 1.06F follow the instructions as described in
for Software Version from 1.06G follow the instructions as described in
8-3-1 EUM - Upgrade Procedure (up to Software Version 1.06F)
1.) Restart the system (turn off and on the system).
The electronic user manual (EUM) must never be opened (by pressing the F1 key on the keyboard)
NOTICE
after last restart! Even if closed again before installing the new EUM.
2.) Press the UTILITIES key on the Touch Panel once to display the Utilities menu.
3.) Touch the SYSTEM SETUP key to invoke the setup desktop on the screen.
4.) Select the
5.) Enter the password SHE, and click the ACCEPT key to get access to the Service Tools.
6.) The "Service Tools" menu appears on the screen.
7.) Click the EUM button. The "Update Software" dialog appears.
8.) Select CD DRIVE. Browse for the EUMSetup_en.exe file in the Install folder and click OK.
9.) Confirm the following message with YES to proceed the update.
10.)The contents of this package are being extracted.
11.)Follow the instructions of the "InstallShield Wizard" (confirm the messages with the NEXT key).
U
RETZTECHNIK LTRASOUND
1
page. The "Password window" appears automatically.
SERVICE
Figure 8-1 Service Tools
Chapter 8 Replacement Procedures
V ® 730 S
OLUSON ERVICE
Section on page 8-4
Section 8-3-2 on page 8-5
EUM button
M
ANUAL
8-3