GE Voluson 730 Service Manual page 59

GE M S - K
EDICAL YSTEMS
D 105844, R
IRECTION EVISION
3-5-1-1 Install the HP printer software/driver (cont'd)
4.) Click the NEXT buttons to start the Hardware Wizard and to locate the driver files.
5.) Use the BROWSE button to search the following path on the hard disk (see:
-
-
NOTE: If no drivers can be found on the hard disk (C:\...) for HP995c , use the HP-Installation disk
and browse for the file HPF995K.INF. Path: F: \DEU\DRIVERS\WIN2K_XP.
6.) Confirm the correct path and click NEXT to install the driver. All necessary files are copied.
7.) Confirm the installation by clicking FINISH to close the Hardware Wizard.
8.) Close all open windows, close the "System Setup" with SAVE & EXIT and restart the system
(turn off and on the system).
After boot up of the system, verify the correct settings in the printer "Properties", see:
NOTICE
"Adjustment of Printer Settings" on page
Ver
U
RETZTECHNIK LTRASOUND
1
C:\Utilities\PrinterDriver\HPDeskjet990c for HP 990cxi
C:\Utilities\PrinterDriver\HPDeskjet995c for HP 995c, and then click OK.
Figure 3-13 Search for Network path
Figure 3-14 Confirm correct path and finish the Installation
Chapter 3 Installation
3-23.
V ® 730 S
OLUSON ERVICE
Figure 3-13)
Section 3-5-5
M
ANUAL
3-13