GE Voluson 730 Service Manual page 112

GE M S - K
EDICAL YSTEMS
D 105844, R
IRECTION EVISION
4-4-12-3 Load System Presets and Configurations (Application Settings)
Always backup any Application Settings before the upgrade; see:
CAUTION
The loading procedure overwrites the existing application settings on the local hard drive. Make sure
to insert the correct MOD or CD-RW. Additionally you can load the backup from d:\User Settings.
1.) If available, insert the Backup/Restore MOD (Magneto-Optical Disk) or CD-RW into the drive.
2.) On the Touch Panel, touch UTILITIES.
3.) In the Utilities menu, touch SYSTEM SETUP to invoke the setup desktop on the screen.
4.) Select the
5.) Choose the media (e.g. MO-Drive) and click the LOAD button.
6.) Select the appropriate file and click OK. The "Load Backup Data" window appears.
If the selected Backup file doesn't fit, a message box appears. see
NOTICE
It is highly recommend to use Application settings which are adapted for the systems software version!
If you select the CONTINUE key to proceed loading the unfit Application settings, a request message
NOTICE
(Figure
4-28
U
RETZTECHNIK LTRASOUND
1
page and click the LOAD button to display the Backup Load window.
BACKUP
Figure 4-23 Backup Load window
Figure 4-24 Wrong Version messages
4-24) to load the appropriate factory settings will appear with each restart of the Voluson® 730.
Section 4-4 - Functional Checks
V ® 730 S
OLUSON
Section 4-4-12-2 on page
Choose the media
click the Load button
Figure 4-24
request message to load factory setting
M
ERVICE ANUAL
4-27.
and