Preparing For Installation; Connection Of Auxiliary Devices; Monitor Connection; Connection Of Peripherals - GE Voluson 730 Service Manual

GE M S - K
EDICAL YSTEMS
D 105844, R
IRECTION EVISION
Section 3-3

Preparing for Installation

3-3-1

Connection of Auxiliary Devices

3-3-1-1

Monitor Connection

1.) Connect all the Monitor cables a shown in
2.) Mount connector protection at the monitor cables.
3.) Activate the power switch on the rear side of the monitor.
NOTE: The switch of the monitor has to be in ON position before starting the system.
Leave monitor power switch always ON.
Power switch
of monitor
3-3-1-2

Connection of Peripherals

1.) Remove rear cover plate. see
-
-
2.) When the cover is loose on top, pull the rear cover out and move upwards.
3-6
U
RETZTECHNIK LTRASOUND
1
Figure 3-4 Monitor Connection
Carefully remove plastic caps using a slotted screwdriver or the blade of a knife.
Loosen screws and washers.
plastic caps; screws and washers
Figure 3-5 Remove rear cover plate
Section 3-3 - Preparing for Installation
Figure 3-4.
Figure 3-5
V ® 730 S
OLUSON ERVICE
Connector protection
M
ANUAL