Rap 7.10 Simm Check-Out Procedure - Xerox DocuPrint P1202 Service Manual

RAP 7.10 SIMM Check-Out Procedure

1 Remove and reinstall the SIMM. Print a Status Report. The RAM size indicated on the Status
Report matches the memory actually installed in the printer.
Y N
| Go to step 3.
2 Return to the Entry Level RAP and continue.
3 Replace the System Controller PWB (PL 7). Print a configuration sheet. The RAM size indicated
on the Status Report matches the memory actually installed in the printer.
Y N
| Inform the customer that the SIMM appears defective or is not compatible with the printer.
A compatible SIMM is a 72 pin, 50ns or faster, no parity.
4 Problem is resolved. Return to the Entry Level RAP and continue.
Xerox DocuPrint P1202 Service Manual
3/99
www.printcopy.info
7-17 Repair Analysis Procedures (RAP)