Table of Contents
Advertisement
ENTERING ALPHANUMERIC CHARACTERS
Some setup and data entry fields use alphanumeric data. Entering alphanumeric
characters is a two-step process. For example, to get the number "2" or the letters "D",
"E", or "F", first press "2". The display then prompts "0=2, 1=D, 2=E, 3=F". To enter
the letter "D", press "1". Use the letters printed on each key as a guide.
MAKING MENU SELECTIONS
The usual method of entering a selection is with the number keys. The three keys located
above the screen provide an alternate selection method that is useful for gloved operation
or for one-handed operation when the instrument is worn on the hip. To use this method,
press the Menu key until the desired selection is highlighted. Then press the Select key
to enter the selection or the escape key to exit from the operation (also see Table 4-1).
MENU STRUCTURE
All of the SapphIRe menus are accessed from the Main Menu. Figure 4-2 shows the
structure of the main menu and sub-menus. The chapters describing the functions of each
sub-menu are also noted.
Analyzer
Information
(this chapter)
Analyze/Start
Change Gas
(chapter 5)
(chapter 6)
Figure 4-2. Main and Sub-Menu Structure
MAIN MENU
Site Information
(chapter 7)
4-3
Chapter 4 Operation
Configuration/
Report/Data
Setup
(chapter 9)
(chapter 8)
Advertisement
Table of Contents
