Thermo Scientific MIRAN 205B Series Instruction Manual page 74

Portable ambient air analyzer
Table of Contents

Advertisement

Chapter 7 Configuration and Setup
Locations
To configure the locations, press
Location Menu, shown below, is displayed.
Press
to select the location mode. At the next display, press
1
function Off or press
To gain access to the list of stored locations or to add locations during logging, enable the
Location Mode. Enabling the Location Mode results in item 3, 4, and 5 being added to
the analysis menu during run mode.
Press
to configure how the location list is sorted. At the next display, press
2
entered or press
Press
to specify where to insert a new location. At the next display, press
3
Not allowed, 2 to insert alphabetically, 3 to insert at list end, or 4 to insert above current
location. The display responds "-ACCEPTED-." Refer to Chapter 8, "Site Info" for
more information about sites and locations.
Report Output
The Report Output parameter configures certain features of the report output. To access
this feature, press
output display, press
order
to select the locations reported, or
, 3
If
is pressed to select the report output mode, press
1
mode or
to choose the "By Location" mode.
2
Note: If 1 is selected and data was not logged to locations, no site report data will be
output.
If
is pressed to select the report location order, press
2
choose "Alphabetical."
(Location List) from the Analysis Setup Page 3. The
3
┌────────────────────────────────────────┐
│╒═══LOCATION SUMMARY════╕ LOCATION MENU │
││
Mode: Enabled
││
││Ordering: As entered
││
││
Insert: Alphabetical │3=How to insert│
││
│└───────────────────────┘
└────────────────────────────────────────┘
Location Menu
to Enable the function. The display responds "-ACCEPTED-."
2
to sort alphabetically. The display responds "-ACCEPTED-."
2
from the third Analysis Setup Menu. Upon presentation of the report
4
to select the report output mode,
1
│1=Mode
│2=Order of list│
new locations│
into list
to turn the location
1
to select the report location
2
to select if duplicates are to be reported.
4
again to choose the "As Logged"
1
to choose "As Entered" or
1
7-20
to sort as
1
to select
1
to
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Miran 205b sapphire

Table of Contents