Chapter 7 Configuration and Setup
If the entry is valid, the display responds "-ACCEPTED-" and then returns to the Matrix
Parameters Display. The next position in the matrix can then be configured. When done,
press the
key. For more information on calibration parameters of multicomponent
ESC
applications, see LAD 001-036.
Save Changes to Library
If the current application has been changed from the library, the display prompts
"Application is changed!" and asks "Save changes to library?" Press
to Save,
ENTER
ESC
to not save.
Note: For step-by-step calibration procedures see Appendix E, "Scan/Calibration
Procedure."
7-41