Table of Contents
Advertisement
Chapter 3
INSTRUMENT PREPARATION
UNPACKING
Remove the instrument from its shipping carton and/or transportation case and check it
for visible damage. If the instrument has been damaged, notify the carrier immediately
and request an inspection report. Obtain a signed copy of the report from the carrier.
Check the contents of the shipping package against Table 3-1; there should be one of
each item. Immediately report any shortages.
Item
1
SapphIRe Ambient Air Analyzer
2
Charger/Power Supply
3
Power Cable*
4
Battery Pack (shipped and installed in the analyzer battery compartment)
5
Chassis Interface Cable*
6
Battery Pack Interface Cable*
7
Shoulder Strap
8
Air Sampling Assembly
10
Particulate Filter
11
Zero Gas Filter
12
Printer Cable*
13
Serial Communication Cable*
14
Battery Door Key
15
Pathlength Change Tool
16
Unit Specific Application Setup Disk
17
Thermo Connect CD
*For identification of cables, see Figure 3-1
Note: If the instrument is returned for any reason, use the original packing. Package all
components in the same manner as they were when shipped from the factory.
Table 3-1. Packing List
Description
3-1
Advertisement
Table of Contents
