Change Gas - Thermo Scientific MIRAN 205B Series Instruction Manual

Chapter 6

CHANGE GAS

To change an application, press 2 (Change application) from the Main Menu. If one
or more applications have previously been selected, the display presents the Recent
Applications Menu in alphabetical order (see Recent Applications menu, below). The
current application is shown on the left and up to five other recent applications on the
right. Select one of the applications shown or press ENTER to view the Applications
Menu to access the standard (fixed) library, single gas or multi-gas user library, or
spectrum scan (see Applications menu, below).
Note: If the Recent Applications Menu is empty due to a firmware update or a factory
reset, the analyzer proceeds directly to the Applications Menu.
Once a selection has made from the Applications Menu, scroll the pages with the arrow
keys if the choice contains more than one page of selections. Make a selection using the
MENU and SELECT or the number keys. The display responds "-ACCEPTED-." If
there is more than one page of selections and the analyzer is not in the User Library, the
analyzer can alternatively go to a search mode by pressing the ENTER key. See Primary
Application menu, below.
┌────────────────────────────────────────┐
│╒══CURRENT APPLICATION══╕Select applic: │
││
││
││
││ METHANE: ---- ppm
││
││
│└───────────────────────┘
└────────────────────────────────────────┘
Recent Applications Menu
┌────────────────────────────────────────┐
│╒══CURRENT APPLICATION══╕
││
││
││
││ METHANE: ---- ppm
││
││
│└───────────────────────┘4=Spectrum scan│
└────────────────────────────────────────┘
Applications Menu
│1=BUTANE
│2=ETHANE
│3=FULL-L-SCAN
│4=XYLENE-H-13.1│
│5=XYLENE-L
│
Enter=More
APPLIC MENU
│1=Standard lib │
│ ─────
│User libraries:│
│2=Single gas
│3=Multi-gas
│ ─────
6-1
│
│
│
│
│
│
│
│
│
│
│