Analysis Setup - Thermo Scientific MIRAN 205B Series Instruction Manual

If is pressed to select the locations reported, press
3
choose "Only Logged" locations.
If is pressed to select if duplicates are to be reported, press
4
to choose "No Duplicates."
2
ANALYSIS SETUP PAGE 4
This menu, shown below, differs from the three other Analysis Setup Menus in that it is
used to set up a specific application. It is accessed by pressing the down arrow key from
Analysis Setup Page 3 menu or the up arrow key from Analysis Setup Page 1 menu.
Choose Application
If the application shown on the left side of the display is not the application that is to be
set up, press (Choose applic). Refer to changing applications at the beginning of this
1
chapter for instructions on how to choose an application.
┌────────────────────────────────────────┐
│╒════════SUMMARY════════╕ ANALYSIS SETUP│
││
││
││Applic: SF6
││
││
││
│└───────────────────────┘
└────────────────────────────────────────┘
Analysis Setup Menu Page 4
Chapter 7 Configuration and Setup
to choose "All Locations" or
1
to choose "Duplicates" or
1
│1=Choose applic│
│ ─────
│2=User Settings│
│3=Applic view
│ and edit │
│
=More
7-21
to
2
│
│
│
│