Uploading Setup Information
Next, reload the file saved earlier into back to the computer. To do this, press
Analyzer Main Menu (see below). Then Press
Data Transfer (see Data Transfer Menus, above). The display indicates that it is waiting
for a request. From the computer, highlight MYSETUP.TXT, and press
transfer is complete, select an application (or single gas) and begin analysis.
┌────────────────────────────────────────┐
│╒══CURRENT APPLICATION══╕
││
││
││
││ METHANE: ---- ppm
││
││
│└───────────────────────┘5=Report/Data
└────────────────────────────────────────┘
from the Report/Data Menu to select
3
MAIN MENU
│
│1=Analyze/Start│
│
│2=Change gas
│3=Site info
│4=Config/Setup │
Analyzer Main Menu
11-5
Chapter 11 Firmware Update
5
. After the
F6
│
─────
│
─────
│
│
│
│
from the