Thermo Scientific MIRAN 205B Series Instruction Manual page 88

Portable ambient air analyzer
Table of Contents

Advertisement

Chapter 7 Configuration and Setup
Reference Compensation Mode
Reference Compensation Mode sets this mode as Off or Enable. The last mode condition
configured is shown on the display. If this is the mode condition for the present
application, press
Press
to change the mode condition. The Mode Select Display appears. Select the
1
condition for the application (Off or Enable). The display responds "-ACCEPTED-" and
then changes to the next parameter to be configured.
Reference Wavelength
Reference Wavelength specifies the reference wavelength. The last reference wavelength
configured is shown on the display. If this is the desired wavelength, press
display changes to the next parameter to be configured. Press
wavelength. The Wavelength Enter Display appears. Key in the desired wavelength (in
m) and press
ENTER
then changes to the next parameter to be configured.
Reference Measured Drift
Reference Measured Drift specifies the percent change of intensity at the reference
wavelength between the zero and the measurement cycles prior to displaying a reference
drift error. The last reference measured drift configured is shown on the display. If this
is the correct allowed drift, press
The display changes to the Humidity Compensation Summary. Press
allowed drift. The Reference Measured Drift Enter Display appears. Key in the desired
allowed drift (0.0 to 100.0) and press
ACCEPTED-" and then changes to the Humidity Compensation Summary.
┌────────────────────────────────────────┐
│╒REFERENCE COMPENSATION═╕
││
Mode: Enabled
││
││Reference
:
4.004um
││
││ Meas Drift:
5.0%
││
│└───────────────────────┘ =Prev
└────────────────────────────────────────┘
Reference Compensation Summary Display
. The display changes to the next parameter to be configured.
ENTER
. If the entry is valid, the display responds "-ACCEPTED-" and
ENTER
ENTER
─────
Reference
│ Compensation
─────
1=Change
.
. If the entry is valid, the display responds "-
7-34
=Next│
. The
ENTER
to change the
1
to change the
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Miran 205b sapphire

Table of Contents