Thermo Scientific MIRAN 205B Series Instruction Manual page 80

Chapter 7 Configuration and Setup
Application Type
The Type is the type of the application (single gas, multi-gas, or scanning). The
Application Type cannot be changed.
Primary Name
The Primary Name is the name of the application being monitored. The last application
configured is shown on the display. If this is the present application, press
display changes to the next parameter to be configured, Secondary name. To change the
name, press . The Primary Name Enter Display appears. Key in the desired name and
1
press . If the entry is valid, the display responds "-ACCEPTED-" and then
ENTER
changes to the next parameter to be configured, Secondary name.
Secondary Name
The Secondary Name is the name defined for enhanced version applications. The last
name configured is shown on the display. If this is the name wanted for the present
application, press
Press to change the name. The Secondary Name Enter Display appears. Key in the
1
desired name and press
" and then changes to the next parameter to be configured.
Gas Count
The Gas Count is the number of gases (1 through 10) for the application. The last
number configured is shown on the display. If this is the desired number for the present
application, press
To change the number, press
number (1 through 10) and press
ACCEPTED" and then changes to the next parameter to be configured.
. The display changes to the next parameter to be configured.
ENTER
. If the entry is valid, the display responds "-ACCEPTED-
ENTER
. The display changes to the next parameter to be configured.
ENTER
. The Gas Count Enter Display appears. Key in the desired
1
ENTER
. If the entry is valid, the display responds "-
7-26
. The
ENTER