Vector Can Databases; Edaq Can Databases; Hbm Sensor Databases - HBM SomatXR CX23-R User Manual

4 Setting up and running a test
38
sensor is connected that conflicts with an existing channel in the setup, the channel
is shaded red.
To reset the channel parameters to the TEDS sensor definition, navigate to the
channels page, select the channel and click Sync TEDS.
When a test is running, TEDS discovery is disabled to preclude the possibility of an
TEDS edited channel being synced. When a test run stops, TEDS discovery is re-
enabled which may take several seconds.
Occasionally, there are errors in TEDS information, which is indicated by the TEDS
error icon ( ).
4.2.2 Vector CAN databases
To simplify CAN channel configuration, the SomatXR/eDAQXR system supports
vector CAN databases. See
Adding CAN database channels
Navigate to the Input channels page of the Test configuration section and click
Add. In the Hardware and setups panel, select the imported CAN database under
the desired CAN connector. Select the CAN channels and click OK.
4.2.3 eDAQ CAN databases
To simplify CAN channel configuration, the CX23-R/EXRCPU supports eDAQ CAN
databases in a .txt format. See
Adding CAN database channels
Navigate to the Input channels page of the Test configuration section and click
Add. In the Hardware and setups panel, select the imported CAN database under
the desired CAN connector. Select the CAN channels and click OK.
4.2.4 HBM sensor databases
To simplify input channel configuration, the SomatXR/eDAQXR system supports
HBM sensor databases for MX modules. See
instructions.
Preparing an HBM sensor database
To import an HBM sensor database file, a .sdbx text file must be created from the
standard .sdb file using the MX Assistant. To create the .sdbx file:
1. Open the MX Assistant and navigate to the Sensor database tab.
2. If the database is not already available, click Add and select the .sdb database
file.
3. Highlight the .sdb database and click Save as. Select to save as a database file
(.sdbx) and save the file on the host machine.
Applying sensor database parameters
Navigate to the Input channels
a4275-8.0 en HBM: public
Databases (Page 147) for importing instructions.
Databases (Page 147) for importing instructions.
Databases
or Hardware pages of the Test configuration section.
Input
(Page 147) for importing
CX23-R and EX23-R