Upgrading From 16X To 24X 2.5-Inch Hdd/Ssd Configuration; Preliminary Steps; Removing The Front Panel Cage; Installing The Front Panel On Qrl - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

7.3.10 Upgrading from 16x to 24x 2.5-inch HDD/SSD
configuration
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver

7.3.10.1 Preliminary steps

"Suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the power cord" on page 49
Ê
"Getting access to the component" on page 50
Ê
"Removing the air duct" on page 61
Ê
"Removing the fan holder" on page 63
Ê

7.3.10.2 Removing the front panel cage

Ê Remove the front panel cage, see section
on page 313.

7.3.10.3 Installing the front panel on QRL

Ê Install the front panel on QRL, see section
on page 333.

7.3.10.4 Installing the ID card holder

Ê Install the ID card holder, see section
page 337.
RX2520 M4
Hard disk drive (HDD) and solid state drive (SSD)
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the front panel cage"
"Installing the front panel on QRL"
"Installing the ID card holder" on
147