5. You can use the mouse to drag the text frame
OSD position.
6. Click
6.3.3 Configuring Text Overlay Settings
Purpose:
You can customize the text overlay.
Steps:
1. Enter the Text Overlay settings interface:
Configuration > Image > OSD Settings
2. Check the checkbox in front of textbox to enable the on-screen display.
3. Input the characters in the textbox.
4. Use the mouse to drag the red text frame
overlay position.
5. Click
6.3.4 Configuring Image Parameters Switch
This function varies depending on different camera models
© Hikvision
IPdome
Figure 6-37 Adjust OSD Location
to activate above settings.
Text
in the live view window to adjust the text
to save the settings.
in the live view window to adjust the