HIKVISION DS-2TD2667-15/PY User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2TD2667-15/PY
  6. User manual
HIKVISION DS-2TD2667-15/PY User Manual

HIKVISION DS-2TD2667-15/PY User Manual

Thermal & optical bi-spectrum network camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thermal & Optical Bi-spectrum Network
Camera
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-2TD2667-15/PY and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-2TD2667-15/PY

Summary of Contents for HIKVISION DS-2TD2667-15/PY

  • Page 1 Thermal & Optical Bi-spectrum Network Camera User Manual...
  • Page 2 INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
  • Page 3 Thermal & Optical Bi-spectrum Network Camera User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
  • Page 4 Thermal & Optical Bi-spectrum Network Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, Caution could result in equipment damage, data loss, performance...
  • Page 5 Thermal & Optical Bi-spectrum Network Camera User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 6 Thermal & Optical Bi-spectrum Network Camera User Manual example, in the case of some lithium battery types). ● DO NOT dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. ●...
  • Page 7 Thermal & Optical Bi-spectrum Network Camera User Manual liquids, such as vases, shall be placed on the equipment. ● No naked flame sources, such as lighted candles, should be placed on the equipment. ● Provide a surge suppressor at the inlet opening of the equipment under special conditions such as the mountain top, iron tower, and forest.

  • Page 8: Table Of Contents

    Thermal & Optical Bi-spectrum Network Camera User Manual Contents Chapter 1 Overview........................1 1.1 Brief Description ........................1 1.2 Function ..........................1 Chapter 2 Device Activation and Accessing ................. 2 2.1 Activate the Device via SADP ....................2 2.2 Activate the Device via Browser ................... 2 2.3 Login ............................
  • Page 9 Thermal & Optical Bi-spectrum Network Camera User Manual 5.3.1 Calibrate Automatically ................... 18 5.3.2 Calibrate Manually ....................19 5.3.3 Verify the Calibration Result ..................20 5.4 Set Rules ..........................20 5.5 Advanced Configuration...................... 22 Chapter 6 Event and Alarm ....................... 24 6.1 Set Motion Detection ......................
  • Page 10 Thermal & Optical Bi-spectrum Network Camera User Manual 8.1.7 Light .......................... 36 8.1.8 Wiper ........................36 8.1.9 Lens Initialization ..................... 36 8.1.10 Auxiliary Focus......................36 8.1.11 Quick Set Live View ....................36 8.1.12 Lens Parameters Adjustment................. 37 8.2 Set Transmission Parameters ..................... 37 Chapter 9 Video and Audio .......................
  • Page 11 Thermal & Optical Bi-spectrum Network Camera User Manual 9.2.10 Defog ........................47 9.2.11 Gray Scale ....................... 47 9.2.12 Set Palette ......................47 9.2.13 Set Target Color ...................... 47 9.2.14 DDE ......................... 48 9.2.15 Brightness Sudden Change ..................48 9.2.16 Enhance Regional Image ..................48 9.2.17 Mirror ........................
  • Page 12 Thermal & Optical Bi-spectrum Network Camera User Manual 10.3.3 View and Download Picture .................. 59 Chapter 11 Network Settings ....................60 11.1 TCP/IP ..........................60 11.1.1 Multicast Discovery ....................61 11.2 Port ............................ 61 11.3 Port Mapping ........................62 11.3.1 Set Auto Port Mapping ..................62 11.3.2 Set Manual Port Mapping ..................
  • Page 13 Thermal & Optical Bi-spectrum Network Camera User Manual 12.9 Time and Date ........................72 12.9.1 Synchronize Time Manually ................... 72 12.9.2 Set NTP Server ......................72 12.9.3 Set DST ........................73 12.10 Set RS-232 ........................73 12.11 Set RS-485 ........................73 12.12 Set Same Unit ........................

  • Page 14: Chapter 1 Overview

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 1 Overview 1.1 Brief Description Thermal & Optical Bi-spectrum network camera equipped with built-in GPU which supports intelligent behavior analysis algorithm, can realize high-precision VCA detection and real-time alarm. It is applied to perimeter defense and fire-prevention purposes in critical infrastructures such as community, villa, construction site, factory, 4S stores, and so on.

  • Page 15: Chapter 2 Device Activation And Accessing

    2.1 Activate the Device via SADP Search and activate the online devices via SADP software. Before You Start Access www.hikvision.com to get SADP software to install. Steps 1. Connect the device to network using the network cable. 2. Run SADP software to search the online devices.

  • Page 16: Login

    Thermal & Optical Bi-spectrum Network Camera User Manual Note The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from 192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of the PC to 192.168.1.100.

  • Page 17: Illegal Login Lock

    Thermal & Optical Bi-spectrum Network Camera User Manual Operating System Web Browser Operation plug-in installation is not required. Display and operation of certain functions are restricted. For example, Playback and Picture are not available. For detailed restricted function, refer to the actual device.

  • Page 18: Chapter 3 Temperature Measurement

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 3 Temperature Measurement When you enable this function, the device measures the actual temperature of the scene. It alarms when temperature exceeds the temperature threshold value. 3.1 Notice This part introduces the notices of configuring temperature measurement function. ●...

  • Page 19: Thermography Configuration Flow Chart

    Thermal & Optical Bi-spectrum Network Camera User Manual 3.2 Thermography Configuration Flow Chart This part introduces the process of configuring temperature measurement.
  • Page 20 Thermal & Optical Bi-spectrum Network Camera User Manual Figure 3-1 Thermography Configuration Flow Chart...

  • Page 21: Automatic Thermography

    Thermal & Optical Bi-spectrum Network Camera User Manual Note Please refer to the Quick Start Guide for detailed information of Installation part in the flow chart. 3.3 Automatic Thermography Configure the temperature measurement parameters and temperature measurement rules. The device can measure the actual temperature and output alarms when temperature exceeds the alarm threshold value.
  • Page 22 Thermal & Optical Bi-spectrum Network Camera User Manual Check to add data on alarm triggered capture of thermal channel. Add Original Data on Stream Check to add original data on thermal view. Data Refresh Interval It means the refresh interval of temperature information. Unit Display temperature with Degree Celsius (°C)/Degree Fahrenheit (°F)/Degree Kelvin (K).

  • Page 23: Set Normal Mode

    Thermal & Optical Bi-spectrum Network Camera User Manual Note The settings vary according to different camera models. Reflect Light Filter & Forklift Filter are mutually exclusive with VCA functions. The filtering status will be displayed on the lower right of the interface. 4.

  • Page 24: Set Expert Mode

    Thermal & Optical Bi-spectrum Network Camera User Manual 5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 6. Click Save. The maximum and minimum temperature will be displayed on the live view. Note Go to Image →...
  • Page 25 Thermal & Optical Bi-spectrum Network Camera User Manual Area Please refer to Area Thermographyfor detailed configuration. 3. Configure the temperature measurement parameters. Emissivity Set the emissivity of the target. The emissivity of the surface of a material is its effectiveness in emitting energy as thermal radiation.

  • Page 26: Point Thermography

    Thermal & Optical Bi-spectrum Network Camera User Manual live view. 3.3.5 Point Thermography Configure the temperature measurement rule and click any point in live view to monitor the temperature. Steps 1. Click in the live view and a cross cursor showed on the interface. 2.

  • Page 27: Manual Thermography

    Thermal & Optical Bi-spectrum Network Camera User Manual 5. Optional: Select one area and click to delete it. 6. Click Save. 3.4 Manual Thermography After enable the manual thermography function of the device, you can click any position on the live view to show the real temperature.

  • Page 28: Chapter 4 Fire Source Detection

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 4 Fire Source Detection The device will trigger and upload alarm when detect the fire source. Fire source detection is applied to fire-prevention purposes in scenic region, forest, tunnel and so on.
  • Page 29 Thermal & Optical Bi-spectrum Network Camera User Manual Sensitivity The sensitivity of fire detection. The bigger the value is, more easily the fire source can be detected, and the false rate is higher. Note When VCA Resource Type is selected as Temperature Measurement+Behavior Analysis, only smoking detection is supported.

  • Page 30: Chapter 5 Behavior Analysis

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 5 Behavior Analysis The behavior analysis function is used to detect whether there is any target break the VCA rules. The optical camera will track the target or the device will alarm when the VCA rule is triggered. 5.1 Flow Chart of Behavior Analysis The process of configuring the behavior analysis function is described below.

  • Page 31: Set Vca Parameters

    Thermal & Optical Bi-spectrum Network Camera User Manual 5.2 Set VCA Parameters Steps 1. Go to Configuration → VCA → Basic Settings. Display VCA Info. on Stream Select to display target info and rule on stream, the information will be added to the video stream, and the overlay will be displayed if you get live view or play back by the VS Player.

  • Page 32: Calibrate Manually

    Thermal & Optical Bi-spectrum Network Camera User Manual Note You can set a maximum of two decimal places. 4. Click to start calibration. Caution ● The auto calibration starts when the person is totally seen in live view, and ends when the person is in the endpoint.

  • Page 33: Verify The Calibration Result

    Thermal & Optical Bi-spectrum Network Camera User Manual 6. Optional: Click to delete the calibration line. 7. Click Save. Caution ● Separate 4 vertical lines in the optical-axis direction at the close site, middle and far site respectively. ● Separate 4 vertical lines at the left, middle and right of the image respectively. ●...
  • Page 34 Thermal & Optical Bi-spectrum Network Camera User Manual Intrusion If any target intrudes into the pre-defined region longer than the set duration, the alarm will be triggered. Region Entrance If any target enters the pre-defined region, the alarm will be triggered. Region Exiting If any target exits the pre-defined region, the alarm will be triggered.

  • Page 35: Advanced Configuration

    Thermal & Optical Bi-spectrum Network Camera User Manual Note The parameter is available in optical channel. Target Size Filter Settings a suitable target size filter helps to increase detection accuracy. There are two ways to set the filter: ● If your device is successfully calibrated, select Filter by Actual Size and the device will filter targets according to the calibration automatically.
  • Page 36 Thermal & Optical Bi-spectrum Network Camera User Manual Click Restore to restore the parameters to the default. Restart VCA Click Restart to restart the VCA function. Note The settings vary according to different models.

  • Page 37: Chapter 6 Event And Alarm

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 6 Event and Alarm This part introduces the configuration of events. The device takes certain response to triggered alarm. Certain events may not be supported by certain device models. 6.1 Set Motion Detection It helps to detect the moving objects in the detection region and trigger the linkage actions.

  • Page 38: Expert Mode

    Thermal & Optical Bi-spectrum Network Camera User Manual Figure 6-1 Set Rules Stop Drawing Stop drawing one area. Clear All Clear all the areas. 4. Optional: You can set the parameters of multiple areas by repeating the above steps. 6.1.2 Expert Mode You can configure the motion detection parameters of day/night switch according to the actual needs.

  • Page 39: Set Video Tampering Alarm

    Thermal & Optical Bi-spectrum Network Camera User Manual 3. Select an Area and click Draw Area. Click and drag the mouse on the live video, then release the mouse to finish drawing one area. Figure 6-2 Set Rules Stop Drawing Finish drawing one area.

  • Page 40: Set Alarm Input

    Thermal & Optical Bi-spectrum Network Camera User Manual Figure 6-3 Set Video Tampering Area 6. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 7. Click Save. 6.3 Set Alarm Input Alarm signal from the external device triggers the corresponding actions of the current device.

  • Page 41: Set Exception Alarm

    Thermal & Optical Bi-spectrum Network Camera User Manual 6.4 Set Exception Alarm Exception such as network disconnection can trigger the device to take corresponding action. Steps 1. Go to Configuration → Event → Basic Event → Exception. 2. Select Exception Type. HDD Full The HDD storage is full.
  • Page 42 Thermal & Optical Bi-spectrum Network Camera User Manual Sudden Decrease of Sound Intensity Detection Detect sudden decrease of sound intensity. Sensitivity is configurable. 3. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage methods. 4.

  • Page 43: Chapter 7 Arming Schedule And Alarm Linkage

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 7 Arming Schedule and Alarm Linkage Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is the response to the detected certain incident or target during the scheduled time. 7.1 Set Arming Schedule Set the valid time of the device tasks.

  • Page 44: Ftp/Nas/Memory Card Uploading

    Thermal & Optical Bi-spectrum Network Camera User Manual Manual Alarm You can trigger an alarm output manually. Steps 1. Set the manual alarm parameters. Alarm Output No. Select the alarm output No. according to the alarm interface connected to the external alarm device.

  • Page 45: Send Email

    Thermal & Optical Bi-spectrum Network Camera User Manual Refer to Set Memory Card for memory card storage configuration. 7.2.3 Send Email Check Send Email, and the device sends an email to the designated addresses with alarm information when an alarm event is detected. For email settings, refer to Set Email.

  • Page 46: Notify Surveillance Center

    Thermal & Optical Bi-spectrum Network Camera User Manual well as the image captured when the alarm is triggered. Video Select the video channel and video duration as required. ● 0 s: It will not upload the video of the seletced channel. ●...

  • Page 47: Set Flashing Alarm Light Output

    Thermal & Optical Bi-spectrum Network Camera User Manual Note The function is only supported by certain device models. 7.2.7 Set Flashing Alarm Light Output Steps 1. Go to Configuration → Event → Basic Event → Flashing Alarm Light Output. 2. Select a White Light Mode. Mode Description Flashing...

  • Page 48: Chapter 8 Live View

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 8 Live View It introduces the live view parameters, function icons and transmission parameters settings. 8.1 Live View Parameters The supported functions vary depending on the model. Note For multichannel devices, select the desired channel first before live view settings. 8.1.1 Window Division ●...

  • Page 49: View Previous/Next Page

    Thermal & Optical Bi-spectrum Network Camera User Manual 8.1.5 View Previous/Next Page When the number of channels surpasses that of live view window division, this function can switch live view among multiple channels. Click to switch live view among multiple channels. 8.1.6 Full Screen This function is used to view the image in full screen mode.

  • Page 50: Lens Parameters Adjustment

    Thermal & Optical Bi-spectrum Network Camera User Manual – For VCA settings, see Fire Source Detection, Temperature Measurement, and Behavior Analysis. Note The function is only supported by certain models. 8.1.12 Lens Parameters Adjustment It is used to adjust the lens focus, zoom and iris. Zoom ●...
  • Page 51 Thermal & Optical Bi-spectrum Network Camera User Manual MULTICAST MULTICAST is suitable for the situation that there are multiple clients. You should set the multicast address for them before selection. HTTP HTTP is suitable for the situation that the third-party needs to get the stream from the device.

  • Page 52: Chapter 9 Video And Audio

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 9 Video and Audio This part introduces the configuration of video and audio related parameters. 9.1 Video Settings This part introduces the settings of video parameters, such as, stream type, video encoding, and resolution.

  • Page 53: Bitrate Type And Max. Bitrate

    Thermal & Optical Bi-spectrum Network Camera User Manual and storage. 9.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The compression speed is fast, but mosaic may occur on the image. Variable Bitrate It means that the device automatically adjust the bitrate under the set Max.

  • Page 54: Smoothing

    Thermal & Optical Bi-spectrum Network Camera User Manual standard. In comparison to H.264, it offers better video compression at the same resolution, frame rate and image quality. MJPEG Motion JPEG (M-JPEG or MJPEG) is a video compression format in which intraframe coding technology is used.

  • Page 55: Audio Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual Player means the VCA info can be displayed by the dedicated player provided by the manufacturer. Video Video means the VCA info can be displayed by any general video player. 9.1.10 Audio Settings It is a function to set audio parameters such as audio encoding, environment noise filtering.

  • Page 56: Set Roi

    Thermal & Optical Bi-spectrum Network Camera User Manual the monitoring screen. Before You Start ● Make sure the audio input device (pick-up or microphone) and audio output device (speaker) connected to the device is working properly. Refer to specifications of audio input and output devices for device connection.

  • Page 57: Display Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual 9.2 Display Settings It offers the parameter settings to adjust image features. Go to Configuration → Image → Display Settings. For device that supports multiple channels, display settings of each channel is required. The settings for different channels may be different.

  • Page 58: Exposure Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual improve image contrast and enhance image. E.g. the bird in forest. ● Self-Adaptive: Choose AGC mode automatically according to current scene. 9.2.3 Exposure Settings Exposure is controlled by the combination of iris, shutter, and photo sensibility. You can adjust image effect by setting exposure parameters.

  • Page 59: Blc

    Thermal & Optical Bi-spectrum Network Camera User Manual Enable or disable the smart supplement light. Brightness Limit Adjust the upper limit of supplement light power. Note The function varies according to device models. 9.2.6 BLC If you focus on an object against strong backlight, the object will be too dark to be seen clearly. BLC (backlight compensation) compensates light to the object in the front to make it clear.

  • Page 60: Defog

    Thermal & Optical Bi-spectrum Network Camera User Manual higher level means stronger reduction degree. Disable the DNR function. 9.2.10 Defog You can enable the defog function when the environment is foggy and the image is misty. It enhances the subtle details so that the image appears clearer. Figure 9-2 Defog 9.2.11 Gray Scale This section introduces the gray scale function in optical channel.

  • Page 61: Dde

    Thermal & Optical Bi-spectrum Network Camera User Manual 4. Set the temperature value and color of High Temperature, Interval Temperature, or Low Temperature targets. Above (be colored) When the target of high temperature needs to be colored, you can set the high temperature color.

  • Page 62: Mirror

    Thermal & Optical Bi-spectrum Network Camera User Manual 9.2.17 Mirror When the live view image is the reverse of the actual scene, this function helps to display the image normally. Select the mirror mode as needed. Note The video recording will be shortly interrupted when the function is enabled. 9.2.18 Video Standard Video standard is an ability of a video card or video display device that defines the amount of colors that are shown and the resolution.

  • Page 63: Vca Rule Display Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual Displayed Information Set camera name, date, week, and their related display format. Text Overlay Set customized overlay text on image. OSD Parameters Set OSD parameters, such as Display Mode, OSD Size, Font Color, and Alignment. 9.4 VCA Rule Display Settings The VCA rule display refers to the function that you can customize the displayed overlay information of the VCA rule, which includes the font size and line and frame color.

  • Page 64: Overlay Picture

    Thermal & Optical Bi-spectrum Network Camera User Manual 9.6 Overlay Picture Overlay a customized picture on live view. Before You Start The picture to overlay has to be in BMP format with 24-bit, and the maximum picture size is 128 × 128 pixel.
  • Page 65 Thermal & Optical Bi-spectrum Network Camera User Manual Normal Mode Disable picture in picture mode. Details Overlay Enable picture in picture mode. You can overlay the image of another Mode channel in the current channel. 3. Click Save.

  • Page 66: Chapter 10 Video Recording And Picture Capture

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 10 Video Recording and Picture Capture This part introduces the operations of capturing video clips and snapshots, playback, and downloading captured files. 10.1 Storage Settings This part introduces the configuration of several common storage paths. 10.1.1 Set Memory Card If you choose to store the files to memory card, make sure you insert and format the memory card in advance.

  • Page 67: Set Ftp

    Thermal & Optical Bi-spectrum Network Camera User Manual The saving path of network disk files. Mounting Type Select file system protocol according to the operation system. Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected.

  • Page 68: Video Recording

    Thermal & Optical Bi-spectrum Network Camera User Manual directly from the cloud for picture and analysis. The function is only supported by certain models. Steps Caution If the cloud storage is enabled, the pictures are stored in the cloud video manager firstly. 1.
  • Page 69 Thermal & Optical Bi-spectrum Network Camera User Manual Steps Note The function varies according to different models. 1. Go to Configuration → Storage → Schedule Settings → Record Schedule. 2. Select channel No. 3. Check Enable. 4. Select a record type. Note The record type is vary according to different models.

  • Page 70: Record Manually

    Thermal & Optical Bi-spectrum Network Camera User Manual The time period you set to stop recording after the scheduled time. Stream Type Select the stream type for recording. Note When you select the stream type with higher bitrate, the actual time of the pre-record and post-record may be less than the set value.

  • Page 71: Capture Configuration

    Thermal & Optical Bi-spectrum Network Camera User Manual Note Go to Configuration → Local, click Save downloaded files to to change the saving path of downloaded video files. 10.3 Capture Configuration The device can capture the pictures manually or automatically and save them in configured saving path.

  • Page 72: View And Download Picture

    Thermal & Optical Bi-spectrum Network Camera User Manual 3. Click Save. 4. Click near the live view or play back window to capture a picture manually. 10.3.3 View and Download Picture You can search, view and download the pictures stored in the local storage or network storage. Steps 1.

  • Page 73: Chapter 11 Network Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 11 Network Settings 11.1 TCP/IP TCP/IP settings must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.

  • Page 74: Multicast Discovery

    Thermal & Optical Bi-spectrum Network Camera User Manual Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required information. It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer transaction.

  • Page 75: Port Mapping

    Thermal & Optical Bi-spectrum Network Camera User Manual to ensure the secure access. WebSocket Port TCP-based full-duplex communication protocol port for plug-in free preview. WebSockets Port TCP-based full-duplex communication protocol port for plug-in free preview. Certificate verification is required to ensure the secure access. Note ●...

  • Page 76: Set Manual Port Mapping

    Thermal & Optical Bi-spectrum Network Camera User Manual Note UPnP™ function on the router should be enabled at the same time. 11.3.2 Set Manual Port Mapping Steps 1. Check Enable UPnP™, and choose a friendly name for the device, or you can use the default name.

  • Page 77: Access To Device Via Domain Name

    Thermal & Optical Bi-spectrum Network Camera User Manual device information via SNMP port. Steps 1. Go to the settings page: Configuration → Network → Advanced Settings → SNMP. 2. Check Enable SNMPv1, Enable SNMP v2c or Enable SNMPv3. Note The SNMP version you select should be the same as that of the SNMP software. And you also need to use the different version according to the security level required.

  • Page 78: Access To Device Via Pppoe Dial Up Connection

    Thermal & Optical Bi-spectrum Network Camera User Manual 11.7 Access to Device via PPPoE Dial Up Connection This device supports the PPPoE auto dial-up function. The device gets a public IP address by ADSL dial-up after the device is connected to a modem. You need to configure the PPPoE parameters of the device.

  • Page 79: Enable Hik-Connect Service Via Web Browser

    Thermal & Optical Bi-spectrum Network Camera User Manual 11.8.1 Enable Hik-Connect Service via Web Browser Follow the following steps to enable Hik-Connect Service via Web Browser. Before You Start You need to activate the camera before enabling the service. Steps 1.

  • Page 80: Set Isup

    1. Get and install Hik-Connect application by the following ways. Visit https://appstore.hikvision.com to download the application according to your mobile phone system.Visit the official site of our company. Then go to Support → Hikvision App Store.Scan the QR code below to download the application.

  • Page 81: Set Open Network Video Interface

    Thermal & Optical Bi-spectrum Network Camera User Manual Register status turns to Online when the function is correctly set. 11.10 Set Open Network Video Interface If you need to access the device through Open Network Video Interface protocol, you can configure the user settings to enhance the network security.

  • Page 82: Set Network Service

    Thermal & Optical Bi-spectrum Network Camera User Manual 4. Click Test to check if the IP or host is available. 5. Click Save. 11.13 Set Network Service You can control the ON/OFF status of certain protocol as desired. Steps Note This function varies according to different models.

  • Page 83: Chapter 12 System And Security

    Thermal & Optical Bi-spectrum Network Camera User Manual Chapter 12 System and Security It introduces system maintenance, system settings and security management, and explains how to configure relevant parameters. 12.1 View Device Information You can view device information, such as Device No., Model, Serial No. and Firmware Version. Enter Configuration →...

  • Page 84: Export Diagnose Information

    Thermal & Optical Bi-spectrum Network Camera User Manual 12.4 Export Diagnose Information Diagnose information includes running log, system information, hardware information. Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Diagnose Information to export diagnose information of the device. 12.5 Reboot You can reboot the device via browser.

  • Page 85: View Open Source Software License

    Thermal & Optical Bi-spectrum Network Camera User Manual Firmware Locate the exact path of the upgrade file. Firmware Directory Locate the directory which the upgrade file belongs to. 3. Click Browse to select the upgrade file. 4. Click Upgrade. 12.8 View Open Source Software License Go to Configuration →...

  • Page 86: Set Dst

    Thermal & Optical Bi-spectrum Network Camera User Manual Note Server Address is NTP server IP address. 5. Click Test to test server connection. 6. Click Save. 12.9.3 Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function.

  • Page 87: Set Same Unit

    Thermal & Optical Bi-spectrum Network Camera User Manual Note You should keep the parameters of the device and the computer or terminal all the same. 3. Click Save. 12.12 Set Same Unit Set the same temperature unit and distance unit. When you enable this function, the unit cannot be configured separately in other setting pages Steps 1.

  • Page 88: Security Audit Log

    Thermal & Optical Bi-spectrum Network Camera User Manual 12.13.2 Security Audit Log The security audit logs refer to the security operation logs. You can search and analyze the security log files of the device so as to find out the illegal intrusion and troubleshoot the security events. Security audit logs can be saved on device internal storage.

  • Page 89: Certificate Management

    Thermal & Optical Bi-spectrum Network Camera User Manual 5. Click Save. 12.13.4 Certificate Management It helps to manage the server/client certificates and CA certificate, and to send an alarm if the certificates are close to expiry date, or are expired/abnormal. Note The function is only supported by certain device models.
  • Page 90 Thermal & Optical Bi-spectrum Network Camera User Manual 6. Click OK. 7. Optional: Click Export to export the certificate, or click Delete to delete the certificate to recreate a certificate, or click Certificate Properties to view the certificate details. Note ●...

  • Page 91: Control Timeout Settings

    Thermal & Optical Bi-spectrum Network Camera User Manual ● If you set the reminding day before expiration to 1, and the detection time to 10:00, and the certificate will expire in 9:00 the next day, the camera will remind you in 10:00 the first day. 3.

  • Page 92: Set Ieee 802.1X

    Thermal & Optical Bi-spectrum Network Camera User Manual the priority of data sending. Note QoS needs support from network device such as router and switch. Steps 1. Go to Configuration → Network → Advanced Configuration → QoS. 2. Set Video/Audio DSCP, Alarm DSCP and Management DSCP. Note Network can identify the priority of data transmission.
  • Page 93 Thermal & Optical Bi-spectrum Network Camera User Manual Administrator The administrator has the authority to all operations and can add users and operators and assign permission. User Users can be assigned permission of viewing live video, setting PTZ parameters, and changing their own passwords, but no permission for other operations.

  • Page 94: Chapter 13 Appendix

    0.98 Hard Paperboard 0.90 White Paper 0.90 Water 0.96 13.2 Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for Hikvision thermal cameras.

  • Page 95: Device Communication Matrix

    Thermal & Optical Bi-spectrum Network Camera User Manual 13.3 Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikvision thermal cameras. 13.4 FAQ Scan the following QR code to get device common FAQ.
  • Page 96 UD29121B...

This manual is also suitable for:

Ds-2td2637-25/qyDs-2td2617-6/piDs-2td2617-10/piDs-2td2617-10/paiDs-2td1217-6/paDs-2td2637-15/pi ... Show all

Table of Contents