Configuring The Data Collection Engine - Intermec IF5 User Manual

Chapter 3 — Developing and Using RFID Applications

Configuring the Data Collection Engine

80
The IF5 data collection engine (DCE) handles communication
between your application and the RFID module, and allows up
to 10 applications to use the same reader simultaneously.
When your application is communicating with the DCE, the
blue Intermec Ready-To-Work Indicator on the IF5 front panel
turns on and stays on. For help, see
To-Work Indicator" on page 7.
You can configure many settings for the DCE. For help, see the
next procedure.
Note: You need to disable the IF5 Developer Tools and the SAP
device controller edgeware before your application can
communicate with the DCE. For help, see
on page 71.
To configure DCE settings
1 From the menu, click RFID Module > DCE Configuration.
The DCE Configuration screen appears.
2 Change DCE settings as needed. For help, see the next table.
"About the Intermec Ready-
"About IF5 Edgeware"
IF5 Fixed Reader User's Manual