Chapter 2 — Configuring Network Settings
Controlling Developer Access
44
You can control how developers access the IF5 by enabling or
disabling these three access methods:
• Via Telnet sessions
• Via FTP server
• Via mounting a Common Internet File System (CIFS)
• Via NFS shared drive
These methods are disabled by default. To enable any of these
methods, see the next procedure.
To enable developer access methods
1 From the menu, click Security > Developer Access. The
Security/Developer Access screen appears.
2 Enable or disable developer access methods by checking or
clearing the check boxes. For help, see the next table.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
IF5 Fixed Reader User's Manual