Intermec IF5 User Manual page 63

IF5 Fixed Reader User's Manual
5 Enter RADIUS server information for each password server.
For help, see the next table.
Note: If you enter more than one password server, the other
password servers act as backup servers. The IF5 uses the first
password server (starting with Server 1) whose IP address/
DNS name and secret key are the same as one in the list.
6 Configure the password server database. For help, see the
documentation that came with your server.
7 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
RADIUS Server Information Descriptions
Type
Primary Server Retry
Time
IP Address/DNS Name IP address or DNS name of this RADIUS
Chapter 2 — Configuring Network Settings
Description
If the RADIUS client is accessing a backup
RADIUS server and gets no response, this is
the amount of time the client waits before
trying to access the primary RADIUS server.
A non-zero value causes the RADIUS client
to periodically try accessing the primary
server to see if it is available. Default is 0.
server.
47