About The Sap-Dc Configuration Files - Intermec IF5 User Manual

About the SAP-DC Configuration Files

IF5 Fixed Reader User's Manual
Appendix B — Configuring and Using the SAP Device Controller
where:
Aii-node-URL is the URL of the SAP-AII node.
port is the TCP port on which the device
controller accepts SAP communications.
device controller is the name of this device controller in SAP-
name AII.
device name is the name of this device in SAP-AII.
DCE port is the TCP port supported by the DCE for
BRI communications. Default is 2189.
The following example configures the device controller to
connect to an SAP-AII server at "myhost" on port 50000 while
accepting connections from SAP-AII on port 9000:
./configsapdc http://myhost:50000/sap/scm/ain 9000
IF5_DC IF5_001 2189
The SAP device controller uses several configuration files:
• Config/SDCConfiguration.xml
Main configuration file for the device controller. Not required
if the SimpleDevice.property file points to other than this
default location. For more information, see the next section.
• RfidReader.properties
Defines hardware-specific settings, such as tag ID length or
the number of Read tries. For more information, see
the RfidReader.properties File" on page 148.
• Config/SimpleDevice.property
Defines logging properties and the URL of the main
configuration file for the device controller. This file is loaded
at startup of the device controller. To use another filename,
add the filename as an additional parameter to the command
line when starting the device controller.
For more information on logging, see
Logging" on page 151.
• Config/FieldMap.xml
"About
"Setting Parameters for
143