Using The Bri Window - Intermec IF5 User Manual

Using the BRI Window

IF5 Fixed Reader User's Manual
Chapter 3 — Developing and Using RFID Applications
2 Check the check box for each of the GPIO interfaces you
want to test. When you check the check box, that GPIO
output will be turned on (equivalent to
its associated GPIO input is turned on.
If a check box is not checked, that GPIO output is turned off
and its associated GPIO input is turned off.
3 Click Read and Write GPIO. The GPIO interface state is
changed.
4 Click Refresh to show the current interface state.
You can send BRI commands to the IF5 or load and run a BRI
script through the web browser interface. For more information
on BRI commands and syntax, see the BRI programmer's
reference manual.
To send BRI commands
1 From the menu, click Developer Tools > Diagnostics > BRI
Commands. The BRI Commands screen appears.
2 Enter the BRI command in the Command entry field.
3 Click Run. The command is executed and return values
appear onscreen. For example, if you sent the ATTRIB
command, the reader attributes appear in the list.
), and
WRITEGPIO=15
87