Configuring Wedm Settings - Intermec IF5 User Manual

Configuring WEDM Settings

IF5 Fixed Reader User's Manual
Chapter 3 — Developing and Using RFID Applications
To download the file from the IF5 to another location, click
Download work.js from Reader. Follow the prompts to save
the file.
Note: Before you can set the saved file as the startup file or
download it from the reader, you need to save the file as
described in Step 6.
Note: This section only applies to IF5s ordered with the IBM
WRDI option.
After you enable the WEDM client, you can use the web browser
interface to configure settings. For help enabling the WEDM
client, see "About IF5 Edgeware" on page 71.
To configure WEDM settings
1 From the menu, click RFID Edgeware. The RFID Edgeware
screen appears with a list of configurable WEDM settings.
2 Change WEDM settings as needed. For more information,
see the IBM WEDM documentation.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
95