Intermec IF5 User Manual page 47

IF5 Fixed Reader User's Manual
To configure Ethernet settings
1 From the menu, click Ethernet. The Ethernet screen appears.
2 Configure the Ethernet settings. For help, see the next table.
Note: Different settings appear in this screen depending on
the current DHCP mode for the IF5.
If you need to configure DNS/Network Services settings such
as DNS addresses or suffixes, or a SYSLOG destination, see
"Configuring Network Services" on page 34.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
Chapter 2 — Configuring Network Settings
31