Table of Contents
Advertisement
Chapter 2 — Configuring Network Settings
56
3 Configure the security parameters. For help, see the next
table.
4 Click 802.1x Client Settings. The Security/802.1x Client
Settings screen appears.
5 Configure the 802.1x client settings. For help, see
"Configuring 802.1x Client Settings" on page 60.
6 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
WPA-802.1x Parameter Descriptions
Parameter
Minimum Multicast
Encryption Type
Authentication
Method
Enable CCKM
Description
Choose a data encryption method for non-
unicast transmission/reception:
TKIP (RSN): Choose Temporal Key Integrity
Protocol for multicast/group keying.
WEP (TSN): Choose WEP keying for
multicast/group keying.
Specifies whether encryption will be used as
part of the authentication. Choose Network
EAP to require encryption, or choose Open
System to require no encryption.
Check this check box to enable fast roaming
using Cisco's CCKM protocol.
IF5 Fixed Reader User's Manual
Advertisement
Table of Contents
Troubleshooting
