Intermec IF5 User Manual page 69

IF5 Fixed Reader User's Manual
2 Choose Dynamic WEP/802.1x Security from the Security
Level drop-down list, and then click Submit Changes. This
screen appears:
3 Configure the parameters for Dynamic WEP security. For
help, see the next table.
4 Click 802.1x Client Settings. The Security/802.1x Client
Settings screen appears.
5 Configure the 802.1x client settings. For help, see
"Configuring 802.1x Client Settings" on page 60.
6 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
Chapter 2 — Configuring Network Settings
53