Intermec IF5 User Manual page 48

Chapter 2 — Configuring Network Settings
32
Ethernet Setting Descriptions
Parameter Description
DHCP Mode Sets the DHCP mode for this IF5:
• Choose Always Use DHCP if you want the
• Choose Use DHCP if IP Address is Zero
• Choose Disable DHCP if you want to assign a
DHCP Name of the DHCP server. The IF5 accepts lease
Server Name offers from only this server.
DHCP User Class (Optional) User class for this DHCP server.
DHCP (Optional) Vendor class for this DHCP server.
Vendor Class
IP Address IP address of the IF5 Ethernet connection. The IP
address has the form x.x.x.x, where x is a number
from 0 to 255.
Set this value to 0.0.0.0 if you set the DHCP
Mode to Use DHCP if IP Address is Zero.
Set this value to a static IP address for the
Ethernet connection if you disabled DHCP.
IP Subnet Mask Subnet mask for this network. The subnet mask
has the form x.x.x.x, where x is a number from 0
to 255.
IP Router IP address of the router. The IP address has the
(Gateway) form x.x.x.x, where x is a number from 0 to 255.
Link Speed Choose the speed and duplex mode you want the
IF5 to use when it communicates with the
Ethernet network.
If you want the IF5 to auto-negotiate this field,
choose Auto Select. Auto Select should work for
most networks.
IF5 to get its IP address from a DHCP server.
you want the IF5 to use DHCP whenever
its IP address is set to 0.0.0.0. If you
choose this option, make sure the IP
Address is set to 0.0.0.0
static IP address to the IF5.
IF5 Fixed Reader User's Manual
if