Intermec IF5 User Manual page 97

IF5 Fixed Reader User's Manual
Chapter 3 — Developing and Using RFID Applications
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
DCE Configuration Parameter Descriptions
Parameter Description
Allow External Enables/disables external TCP connections to the
BRI Connections DCE BRI server. If this check box is not checked,
the DCE accepts BRI connections only from
edgeware applications on the IF5.
BRI TCP Port Specifies the TCP port used for incoming BRI
connections to the DCE. This port must be
unique for all TCP services running on the IF5.
Valid range is 0 to 65535. Default is 2189.
BRI Heartbeat Enables/disables an asynchronous heartbeat event
(EVT: HEARTBEAT BRI STRING). When
enabled, the IF5 sends the heartbeat event every
30 seconds, enhancing the IF5's ability to detect
TCP sessions that were not closed cleanly.
Trigger Enables DCE control of trigger states.
Management
When Trigger Management is enabled (default),
the DCE manages the triggers so your application
never needs to issue a TRIGGEREADY
command.
When Trigger Management is disabled, your
application must manage issuance of the
TRIGGERREADY command.
Allow External Enables/disables external TCP connections to the
EPC Connections DCE EPC server. When this box is not checked,
the DCE accepts EPC connections only from
applications residing on the IF5.
EPC TPC Port Specifies the TCP port used for incoming EPC
Reader Protocol connections to the DCE. This
port number must be unique for all TCP services
running on the IF5. Valid range is 0 to 65535
(default is 4684).
Enable Logging Enables/disables logging of commands sent and
received through the DCE.
81