Intermec IF5 User Manual page 116

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF5
100
SNMP Community Parameter Descriptions
Parameter
Enable SNMPv3
Enable SNMPv1/
SNMPv2c
SNMP Community
(Read-Only)
SNMP Community
(Read/Write)
SNMP Community
(Secret)
SNMPv3 Read-Only
User
SNMPv3 Read-Write
User
Authentication
Protocol
Data Privacy Protocol
Description
Enables/disables SNMPv3.
Enables/disables SNMPv1 and SNMPv2c.
Specifies a password that provides read-only
access. This password can be from 1 to 15
characters and is case sensitive. The default is
.
public
Specifies a password that provides read and
write access. This password can be from 1 to
15 characters and is case sensitive. The default
is .
CR52401
Specifies a password that provides read and
write access and lets the user change the
community strings. This password can be
from 1 to 15 characters and is case sensitive.
The default is
secret
Specifies a password that provides read-only
access. This password can be from 1 to 15
characters and is case sensitive.
Specifies a password that provides read and
write access. This password can be from 1 to
15 characters and is case sensitive.
Specifies the protocol for authenticated
SNMPv3 messages. This must match a
supported authentication protocol on the
SNMP management station.
Specifies the protocol for encrypted SNMPv3
messages. This must match a supported
encryption protocol on the SNMP
management station.
IF5 Fixed Reader User's Manual
.