Viewing The Dce Events Log - Intermec IF5 User Manual

Chapter 3 — Developing and Using RFID Applications

Viewing the DCE Events Log

82
If you enable DCE logging, you can see a list of commands sent
and received through the DCE. You can save the logfile as a .txt
file.
To enable DCE logging and view the logfile
1 From the menu, click RFID Module > DCE Configuration.
The DCE Configuration screen appears.
2 Check the Enable Logging check box.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
4 After the IF5 reboots, click Refresh in the browser menu. The
login screen appears.
5 Enter your user name and password, and then click Login.
The TCP/IP Settings screen appears.
6 From the menu, click RFID Module > DCE Configuration.
The DCE configuration screen appears.
7 Click Display Log. The DCE Configuration/Display Log
screen appears with a list of command events. For more
information on command events, see the next table.
IF5 Fixed Reader User's Manual