Chapter 4 — Managing, Troubleshooting, and Upgrading the IF5
Managing the IF5
Using Simple Network Management Protocol (SNMP)
98
There are several methods you can use to manage the IF5. You
can use:
• a web browser. For help, see
Interface" on page 19.
method for all procedures.
• an SNMP management station. For help, see the next section.
• the Wavelink Avalanche client management system. For help,
see
"Using Wavelink Avalanche" on page 101.
• the Intermec SmartSystems Console. For help, see
Intermec SmartSystems Console" on page 103.
You can access and manage the IF5 from a Simple Management
Network Protocol (SNMP) station. Contact your Intermec
representative if you need to obtain a copy of the management
information base (MIB).
Before you can use an SNMP management station, you must
define the IF5 SNMP community strings.
To configure the SNMP community strings
1 From the menu, click Network Management. The Network
Management screen appears.
"Using the Web Browser
This manual assumes you are using this
IF5 Fixed Reader User's Manual
"Using the