Displaying Tags - Intermec IF5 User Manual

Displaying Tags

IF5 Fixed Reader User's Manual
Chapter 3 — Developing and Using RFID Applications
You can use the Diagnostics tool to continuously execute a read
cycle on the IF5. For example, this procedure may be useful when
you are testing antenna locations or tag placement.
Note: The read cycle is based on the settings listed in the RFID
Module screen. For help, see
page 74.
To display tags and tag IDs
1 From the menu, click Developer Tools. The Display Tags
screen appears.
• In the Set refresh rate entry field, enter the number of
seconds for the read cycle, and then click . The default is
10.
• In the Set maximum tags to be identified entry field,
enter the maximum number of tags to identify during
each read cycle, and then click . The default is 10.
2 Click Start Reading. The IF5 looks for RFID tags within
range of the connected antennas.
When the IF5 finds readable tags, the tag IDs appear in the
list in the order in which they were read.
"Configuring RFID Settings" on
85