Configuring The If5 For A Wireless Network - Intermec IF5 User Manual

Configuring the IF5 for a Wireless Network

IF5 Fixed Reader User's Manual
DNS IP address of a domain name server that the IF5 uses
to resolve DNS names if the DNS server at DNS
Address 2
Address 1 is not responding.
DNS
Domain name suffix that will be appended to DNS
names that cannot be resolved.
Suffix 1
DNS Domain name suffix that will be appended to DNS
names that cannot be resolved either by themselves or
Suffix 2
using DNS suffix 1.
5 Press the left arrow key to return to the main reader
configuration menu.
6 Press the down arrow key to select Save Configuration and
then press Enter. The new settings are saved.
7 Press the down arrow key to select Reboot and then press
Enter. The IF5 reboots. When the boot process is finished,
you see "Starting system" at the bottom of the HyperTerminal
screen.
8 Disconnect the null-modem cable and AC power cable from
the IF5.
The IF5 is now ready to be connected to your network. See
"Connecting the IF5 to Your Network" on page 25.
Follow this procedure to configure the IF5 for connection to a
wireless network.
To configure the IF5 for an 802.11g connection
1 Connect to the IF5 using a communications program. For
help, see "To use a communications program" on page 11.
2 In the IF5 RFID Reader Configuration menu, press the down
arrow key to choose 802.11g Radio and then press Enter.
The 802.11g Radio screen appears, with Node Type set to
Disabled.
Chapter 1 — Getting Started
15