Intermec IF5 User Manual page 115

IF5 Fixed Reader User's Manual
Chapter 4 — Managing, Troubleshooting, and Upgrading the IF5
2 Configure the SNMP community parameters. For help, see
the next table.
3 If you did not enable SNMPv3, continue with Step 5.
If you enabled SNMPv3, click Network Management >
SNMPv3 Configuration. The SNMPv3 Configuration
screen appears.
4 Change settings for SNMPv3. For help, see the next table.
5 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
99