About The Intermec Ready-To-Work Indicator - Intermec IF5 User Manual

About the Intermec Ready-To-Work Indicator

IF5 Fixed Reader User's Manual
The blue Ready-To-Work Indicator shows when an application is
communicating with the data collection engine (DCE) on the
IF5. The next table explains the different states of the Ready-To-
Work indicator.
Ready-to-Work Indicator Status Descriptions
Status Description
Off IF5 does not have power.
Blinking No application is communicating with the DCE.
Steady IF5 developer tools are enabled (default). For more
information, see
Or, the SAP device controller edgeware is enabled. For
more information, see
Controller" on page 140.
Or, your custom application is communicating with the
DCE. You need to disable the developer tools and the
SAP device controller edgeware to use a custom
application. For more information, see
Edgeware" on page 71.
For more information on the DCE, see
Collection Engine" on page 80.
Chapter 1 — Getting Started
"About IF5 Edgeware" on page 71.
"Enabling the SAP Device
"About IF5
"Configuring the Data
7