About Certificates; Viewing Certificates - Intermec IF5 User Manual

About Certificates

Viewing Certificates

IF5 Fixed Reader User's Manual
802.1x Client Parameter Descriptions (continued)
Parameter
Preferred Protocol
User Name
Password
Verify CA Certificate Enables/disables verification of the server
The default server certificate on the IF5 (ValidForHTTPSOnly)
supports the secure web browser interface. If you choose to use
transport layer security (TLS) with WPA-802.1x, WPA2-802.1x,
or Dynamic WEP security, you need to have a unique client
certificate on the IF5 and a trusted root certificate authority (CA)
certificate. You can use a third-party CA to issue unique client
certificates and a root certificate.
Note: To install or uninstall certificates, you need to access the
IF5 via a secure web browser. For help, see
Browser Interface" on page 19.
You can use the web browser interface to view the certificates
loaded on the IF5.
To view certificates
• From the menu, click Security > Certificate Details. The
Certificate Details screen appears.
Chapter 2 — Configuring Network Settings
Description
Specifies which 802.1x authentication protocol
(TLS, TTLS, PEAP, or LEAP) the IF5 sends to
the authentication server if the server sends an
unsupported protocol.
If you do not allow an 802.1x authentication
protocol, this parameter is not available.
User name for TTLS, PEAP, or LEAP
authentication.
Password for TTLS, PEAP, or LEAP
authentication.
certificate signature against the certificate
installed on the IF5.
"Using the Web
61