Configuring Wpa-Psk Security - Intermec IF5 User Manual

Chapter 2 — Configuring Network Settings

Configuring WPA-PSK Security

54
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
Dynamic WEP Parameter Descriptions
Parameter Description
Authentication Specifies whether encryption will be used as part of
Method the authentication. Choose Network EAP to
require encryption, or choose Open System to
require no encryption.
Enable mixed cell Enable this mode to allow the IF5 to communicate
with Cisco access points configured for mixed-cell
use. Mixed-cell use allows both WEP and non-
WEP clients to communicate with the same access
point.
1 From the menu, click Security > 802.11g Radio. The
Security/802.11g Radio screen appears.
2 Choose WPA-PSK from the Security Level drop-down list,
and then click Submit Changes. This screen appears:
IF5 Fixed Reader User's Manual