Intermec IF5 User Manual page 59

IF5 Fixed Reader User's Manual
2 Enable or disable the access methods that users can use to
connect to the IF5. For help, see the next table.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 22.
Access Method Descriptions
Method
Enable Startup Scripts
(User-defined)
Browser Access
Allow ICMP
Configuration
Reject Expired
Certificates
Chapter 2 — Configuring Network Settings
Description
Enables or disables user-defined startup
scripts or applications at boot time.
When this box is checked, applications or
scripts located in these directories will be run
when the IF5 boots:
• /home/developer/startup
• /cf/startup
For more information, see
Applications at Boot Time" on page 70.
Determines if users can use a web browser to
configure or manage this IF5. Browser access
is through either port 80 or port 443.
Choose Secure-Only if you want users to log
in using only the secure web browser
(HTTPS) interface. Secure-Only access is
through port 443.
If you disable browser access to the IF5, you
may need to use a communications program
to configure and manage the IF5. For help,
see "Using a Communications Program" on
page 10.
Determines if users can use a program that
uses ICMP echo (ping) to set the IP address
or restore factory defaults on this IF5.
Check this check box if you want the IF5 to
reject certificates that have expired. For help,
see "About Certificates" on page 61.
"Running
43