Chapter 2 — Configuring Network Settings
Configuring Static WEP Security
50
Note: If you configure static WEP security for the IF5, you
cannot enable 802.1x authentication for that IF5.
To use static WEP keys, your network must support WEP
encryption. All access points and wireless end devices (including
this IF5) must use the same WEP encryption type and WEP
transmit key. You should periodically change this WEP transmit
key to prevent an unauthorized person with a sniffing tool from
monitoring your network and discovering the WEP key.
You can enter up to four WEP keys and then pick a WEP
transmit key.
To configure WEP security
1 From the menu, click Security > 802.11g Radio. The
Security/802.11g Radio screen appears.
IF5 Fixed Reader User's Manual