Configuring The 802.11G Radio - Intermec IF5 User Manual

Configuring the 802.11g Radio

IF5 Fixed Reader User's Manual
This section explains how to configure settings for the 802.11g
radio.
To configure the radio
1 In the main menu, click 802.11g Radio. The 802.11g Radio
screen appears:
Note: If the radio is disabled, choose Enable from the Node
Type drop-down list, and then click Submit Changes to see
the complete 802.11g Radio screen.
2 Configure the parameters for the radio. For help, see the next
table.
3 (Optional) If you need to configure network services settings
such as DNS addresses or suffixes, or a SYSLOG destination,
see "Configuring Network Services" on page 34.
4 (Optional) If you need to configure Internet Protocol version
6, see "Enabling IPv6" on page 33.
5 (Optional) If you need to configure security, see
Security" on page 41.
Chapter 2 — Configuring Network Settings
"Configuring
37