Intermec IF5 User Manual page 21

IF5 Fixed Reader User's Manual
IF5 Front Panel Port Descriptions
Port Description
AC Power Used with an appropriate power cable, this port
connects the reader to an AC power source.
Ethernet 10BaseT/100BaseTx port. Used with an appropriate
cable, this port connects the reader to your Ethernet
network. The reader auto-negotiates with the device it
is communicating with so that the data rate is set at the
highest rate at which both devices can communicate.
Serial Used with an RS-232 null modem cable (P/N
059167), this port connects the reader to a PC for
configuration.
Control General purpose input/output (GPIO) port. This port
connects the reader to industrial controls such as relays
or indicators. The port includes optically-isolated
inputs, optically-isolated low voltage DC outputs, and
access to 12 VDC.
For more information on the IF5 GPIO interfaces, see
"About the GPIO Interfaces" on page 126.
For more information, see
Chapter 1 — Getting Started
"Port Pin Assignments" on page 137.
5