Basic Setup With Configuration Bar Codes; Resetting Your Scanner; Configuring The Postamble - Intermec SG20T1D User Manual

Chapter 4 — Configuring the SG20T Scanner

Basic Setup with Configuration Bar Codes

Resetting Your Scanner

Configuring the Postamble

28
This chapter provides you with configuration bar codes for a basic
setup. For more configuration options, use EasySet (see
"Configuring Your System with EasySet" on page
To reset your scanner, read the reset factory defaults configuration
bar code.
Reset factory defaults
The default postamble is <CR> <LF>. For certain applications or
when using USB Keyboard HID you may need to change this setting.
Use the following configuration bar codes to change the default
postamble in your scanner.
Carriage Return + Line Feed (*)
Carriage Return
31).
SG20T Tethered Scanner User's Guide
None
Enter